7 Commissioning
SMA Solar Technology AG
Operating manual EDMM-10-BE-en-20 35
• Master and slave configuration
• Meter configuration
• Grid management services
☑ A successful commissioning is confirmed by a message.
7.4 Registering in SunnyPortal
Once you have carried out the commissioning on the user interface of the product, you can make
further system configurations in SunnyPortal. For this, all products of a system must be registered in
SunnyPortal.
Requirements:
☐ The product must be in operation and connected to the local network via an Internet router.
☐ The registration ID (RID), identification key (PIC) and the Internet address of the type label or
of other provided labels must be available.
☐ The system LED must glow green.
☐ An active Internet connection must be established.
Procedure:
1. Call up the Internet address https://ennexOS.SunnyPortal.com in the web browser.
2. Register as a new user in SunnyPortal or log into SunnyPortal as an existing user.
3. Create a new system or add product to an existing system.
Register as a new user in SunnyPortal.
1. Call up the Internet address https://ennexOS.SunnyPortal.com in the web browser.
2. Select I require a user account.
3. Enter the necessary data for registration.
4. Select [Register].
☑ After a few minutes you will receive an e-mail containing a link and your access data to
SunnyPortal.
5. If you have not received an e-mail from Sunny Portal, check whether the e-mail has been
redirected to a folder for junk mail or whether an incorrect e-mail address has been entered.
6. Follow the link in the confirmation e-mail within 48 hours.
☑ SunnyPortal opens a separate window to confirm successful registration.
7. Call up the Internet address https://ennexOS.SunnyPortal.com in the web browser.
8. Enter the e-mail address and the SunnyPortal password in the fields User and Password.
9. Select [Login].
Log in to SunnyPortal as an existing user.
Requirement:
☐ You must have access to a user account in SunnyPortal, SunnyPlaces or SunnyDesign.