Need help?Do you have a question about the SMA Home Storage HS-BM-3.28-10 and is the answer not in the manual?
General| Model | HS-BM-3.28-10 |
|---|---|
| Battery Capacity | 3.28 kWh |
| Usable Capacity | 2.95 kWh |
| Weight | 45 kg |
| Operating Temperature | -10°C to +50°C |
| IP Rating | IP65 |
| Nominal Battery Energy | 3.28 kWh |
| Usable Battery Energy | 2.95 kWh |
| Nominal Voltage | 51.2 V |
| Communication Interface | CAN, RS485 |
| Operating Temperature Range | -10°C to +50°C |
| Protection Class | I |
| Battery Type | Lithium Iron Phosphate (LiFePO4) |
Information on downloading current warranty conditions from the internet.
Details on trademark recognition and designation.
Defines the product's intended application and limitations for home energy storage.
Contains essential safety guidelines to be observed when working with the product.
Outlines requirements for the installation site and mounting positions.
Step-by-step instructions for mounting battery modules using a wall bracket.
Details variants, dimensions, and procedures for mounting battery modules with a base.
Identifies connection points on the product, including grounding, DC, and communication terminals.
Details requirements for grounding and DC cables for proper electrical connection.
Step-by-step guide for performing the electrical connection of the product.
Overview of steps for commissioning the SMA Home Storage system.
Step-by-step guide for turning on and commissioning the battery modules.
Lists different ways errors can be indicated and where to find solutions.
Details specific event messages and corrective measures for system errors.
Provides guidance for errors indicated solely by LED signals without inverter messages.
Provides general specifications like dimensions, weight, temperature, and certifications.
Specifies DC connection details, usable energy, voltage, and current ratings.
To Next Page
