6 Mounting
SMA Solar Technology AG
Operating Manual 29HS-BM-3.28-10-BE-en-10
6.3.2 Dimensions for mounting with base
Figure 12: Position of the anchoring points (dimensions in mm)
6.3.3 Mounting the battery modules with base
Additionally required mounting material (not included in the scope of delivery):
☐ 2 to 4 screws per base suitable for the support surface and the weight of the product
☐ 2 to 4 washers per base suitable for use with the screws
☐ Where necessary, 2 to 4 screw anchors per base suitable for the support surface and the screws
Procedure:
1. Place the base against the wall and align the fixing bracket evenly with the wall.
To Next Page
Loading...