SMA Home Storage HS-BM-3.28-10 - Mounting with base

6 Mounting
SMA Solar Technology AG
Operating ManualHS-BM-3.28-10-BE-en-1028
11. For battery modules directly above one another: fasten battery
module on the left and right to the previous battery module using
a supplied screw and washer assembly (TX20; torque 2.5Nm).
Ensure that the battery module is securely in place.
12. For battery modules directly above one another: repeat the above two steps for the additional battery modules.
6.3 Mounting with base
6.3.1 Mounting variants when mounting with base
1 battery 2 batteries 3 batteries 4 batteries 4 or 5 batteries
Maximum of
3 batteries
Figure 11: Mounting variants when mounting with base
Also see:
• Requirements for the electrical connection⇒page36