6 Mounting
SMA Solar Technology AG
Operating Manual 27HS-BM-3.28-10-BE-en-10
8. Slightly screw in a supplied screw and washer assembly on the
wall mounting bracket at the bottom, leaving space for the
mounting bracket of the battery module (TX20).
9. Hook the lower battery module in the wall mounting bracket and
secure below with the screw and washer assembly provided
(TX20; torque 2.5Nm). To do this, the 2 bolts on the right and left
between the ribs on the back of the battery module must be
hooked into the keyways of the wall mounting bracket. Ensure
that the battery module is securely in place.
10. For battery modules directly above one another: mount another
battery module above the previous battery module.
To Next Page
Loading...