SMA Home Storage HS-BM-3.28-10 - Page 26

6 Mounting
SMA Solar Technology AG
Operating ManualHS-BM-3.28-10-BE-en-1026
3. Secure the wall mounting bracket horizontally on the wall using
screws and washers.
4. For battery modules directly above one another: screw the
connecting element with 2 supplied screw and washer assemblies
to the wall mounting bracket (TX20; torque 2.5Nm).
5. For battery modules directly above one another: align another
wall mounting bracket on the connecting element and screw
down with a supplied screw and washer assembly (TX20; torque
2.5Nm).
6. For battery modules directly above one another: fasten another wall mounting bracket to the wall using screws
and washers.
7. For additional battery modules directly above one another: repeat the above three steps for the third battery
module.