SMA Home Storage HS-BM-3.28-10 - Connection Overview of the Battery Communication with the Inverter

7 Electrical Connection
SMA Solar Technology AG
Operating ManualHS-BM-3.28-10-BE-en-1040
5. Insert the connector through the adapter and plug the battery
data cables together.
6. Secure the connection. To do this, firmly tighten the adapter and
the swivel nut.
7. Ensure that the battery data cable is securely in place by pulling slightly on it.
Also see:
• Overview of the Connection Area⇒page35
• Battery data cable requirements⇒page37
• Wiring overview with hybrid inverter⇒page36
7.7 Connection overview of the battery communication with the inverter
Figure 17: Connection overview of the battery communication with the inverter