SMA Home Storage HS-BM-3.28-10 - Mount the battery modules with wall mounting bracket

6 Mounting
SMA Solar Technology AG
Operating Manual 25HS-BM-3.28-10-BE-en-10
6.2.2 Dimensions for wall mounting
Figure 10: Position of the anchoring points (dimensions in mm)
6.2.3 Mount the battery modules with wall mounting bracket
Additionally required mounting material (not included in the scope of delivery):
☐ 3 screws per battery module suitable for the support surface and weight of the battery module
☐ 3 washers per battery module suitable for the screws
☐ Where necessary, 3 screw anchors per battery module suitable for the support surface and the screws
Procedure:
1. Mark the position of the drill holes using the wall mounting bracket.
2. Drill the holes and insert the screw anchors.