6 Mounting
SMA Solar Technology AG
Operating ManualHS-BM-3.28-10-BE-en-1030
2. Attach fixing bracket with 2 supplied screw and washer
assemblies to the base (TX20; torque 2.5Nm).
3. Mark the position of the drill holes using the fixing bracket.
4. Drill holes and insert the screw anchors if necessary.
5. Align the base horizontally on the wall and screw to the wall
using 2 screws and washers.
6. Place the battery module on the base. Ensure that the battery
module is securely in place.
To Next Page
Loading...