SMA Home Storage HS-BM-3.28-10 - Page 34

6 Mounting
SMA Solar Technology AG
Operating ManualHS-BM-3.28-10-BE-en-1034
4. Attach both battery modules on the left and right to the base
using a supplied screw and washer assembly each (TX20; torque
2.5Nm). Ensure that the battery modules are securely in place.
5. If there is an odd number of battery modules, choose a different mounting option for the remaining battery
module.
6. For battery modules directly above one another: attach fixing
bracket to both battery modules using 2 supplied screw and
washer assemblies each (TX20; torque 2.5Nm). Fasten the fixing
brackets to each other using 2 supplied screw and washer
assemblies (TX20; torque 2.5Nm).
7. For battery modules directly above one another: place 2 more
battery modules on the previous battery modules. Attach both
battery modules on the left and right to the previous battery
modules using a supplied screw and washer assembly each
(TX20; torque 2.5Nm). Ensure that the battery modules are
securely in place.