SMA PPM-10 - High-Precision Current and Voltage Measurement

6 Electrical Connection
SMA Solar Technology AG
Installation Manual 29PPM-10-IA-en-16
Position Designation Description
C
K102
Reserved for future applications
D Power analyzer with measuring
modules K103, K104 and
K105
Current and voltage measurement
The terminal block X700 is intended for the six current measure-
ments.
The terminal block X200 is intended for the three voltage measure-
ments.
6.1.5 High-Precision Current and Voltage Measurement
A
B C
Figure 15: Setup of the high-precision current and voltage measurement (variant: Hybrid Controller XL 1xGMP)
Position Designation Description
A Processor assembly of the pro-
grammable logic controller
K100
Without external terminal
B
Digital I/O module K101 The terminal block X702 is intended for the connection of the inputs
and outputs.
C Power analyzer with measuring
module K103
High-precision current and voltage measurement
The terminal block X700 is intended for one current measurement.
The terminal block X200 is intended for one voltage measurement.