EasyManua.ls Logo

SMA PPM-10 - Typographical Elements in the Document; Designations in the Document; Explanation of Used Terms

SMA PPM-10
70 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1 Information on this Document
SMA Solar Technology AG
Installation ManualPPM-10-IA-en-166
1.5 Typographical Elements in the Document
Typography Use Example
bold
Messages
Terminals
Elements on a user interface
Elements to be selected
Elements to be entered
Connect the insulated conductors
to the terminals X703:1 to
X703:6.
Enter 10 in the field Minutes.
>
Connects several elements to be
selected
Select Settings > Date.
[Button]
[Key]
Button or key to be selected or pressed
Select [Enter].
# Placeholder for variable components
(e.g., parameter names)
Parameter WCtlHz.Hz#
1.6 Designations in the Document
Complete designation Designation in this document
SMA Data Manager L Data Manager
SMAHybridController HybridController, programmable logic controller
SMA Power Plant Manager Power Plant Manager, product
1.7 Explanation of Used Terms
Term Explanation
Genset Electric generator with combustion engine
Hybrid system System for the control of energy flows based on a programmable logic controller
(e.g. SMAHybridController or Power Plant Manager)
Various energy sources can be integrated into a hybrid system (e.g. PV power
plant, genset or battery-storage system).
Redundancy Redundancy is the additional presence of a functionally identical or comparable
resource of a technical system when this resource is normally not needed during
fault-free operation. An example of this is a redundant system controller such as
the SMAPowerPlantManager. This additional resource increases the reliability
and thus the availability of the system.
Programmable Logic Controller
(PLC)
A programmable logic controller is a digitally operating, electronic system. It
uses programmable memory for the internal storage of user-oriented instructions
to control functions and various types of machines or processes through digital or
analog inputs and outputs.

Table of Contents

Related product manuals