SMA SUNNY CENTRAL 900CP XT - User Interface; Design of the User Interface; Tree View and Device View

3 Product Overview
SMA Solar Technology AG
Maintenance ManualSCCPXT-E7-WA-en-3724
3.3.4 User Interface
3.3.4.1 Design of the User Interface
Via the user interface, you can set the communication of the devices of your PV power plant, configure the inverter
parameters and read off error messages and operating data.
A
B
C
D
E
Figure 10: Design of the user interface (example)
Position Designation
A Tree view or device view
B Status bar
C Logout button
D Navigation bar
E Content area
3.3.4.2 Tree View and Device View
You can call up data of the individual devices of your PV power plant in the tree view or the device view. Depending
on which view you have selected, the devices are sorted differently.
Symbol Designation Explanation
Tree view In the tree view, the user interface shows the devices in the or-
der in which they are connected to the data bus.
Device view In the device view, the user interface shows all devices sorted
by device type. The number shown in parentheses indicates the
number of devices of a device type.