SMA SUNNY ISLAND 6.0H - Data Storage and Firmware Update; Inserting SD Memory Card; Saving and Loading Parameters

5 Commissioning
SMA Solar Technology AG
System DescriptionSI44M-80H-13-MC-IA-en-1032
4. Press the start-stop button on the master of the maincluster and
hold it until a signal sounds.
5. In order to receive service assignments for the Sunny Island system, all system data must be recorded in the
information sheet for Sunny Island systems and made available to Service (for information sheet see www.SMA-
Solar.com).
5.4.4 Registering the Multicluster System in SunnyPortal
To use PV system monitoring, register your multicluster system in SunnyPortal powered by ennexOS.
Requirements:
☐ A SMADataManagerM/L must be installed in the multicluster system.
Procedure:
• Register the SMADataManagerM/L in SunnyPortal (see operating manual of the communication product).