Need help?Do you have a question about the SMA SUNNY ISLAND 8.0H and is the answer not in the manual?
General| Model | Sunny Island 8.0H |
|---|---|
| AC Nominal Voltage | 230 V |
| DC Voltage Range | 40 - 60 V |
| Input Voltage Range | 40 - 60 V |
| Battery Voltage | 48 V |
| Weight | 45 kg |
| Operating Temperature Range | -25 °C to +60 °C |
| Protection Class | I |
| Protection Degree | IP54 |
| Topology | Transformerless |
| Rated Power | 8000 W |
| Max. Apparent AC Power | 8 kVA |
| Maximum AC Power | 8 kW |
| Nominal AC Frequency | 50 Hz / 60 Hz |
| Maximum Efficiency | 96 % |
Lists the device types for which this document is valid.
Identifies the intended audience and required qualifications for operating the device.
Explains the meaning of various symbols used throughout the document.
Details the usage and examples of different text formatting styles.
Defines how menus and parameters are presented in the document.
Provides a list of abbreviations with their designations and explanations.
Describes the product's purpose and operational limitations to ensure safe usage.
Specifies the necessary qualifications for operators and skilled persons.
Lists critical safety instructions for electric shock, explosion, and crushing hazards.
Details risks associated with hot surfaces and short-circuit currents.
Provides a general overview of the off-grid inverter and its function.
Explains the information and layout of the device's type label.
Details the meaning of symbols found on the inverter's type label.
Explains various symbols related to device operation and safety.
Describes the components and functions of the inverter's control panel.
Explains the status indications of the Grid LED.
Explains the status indications of the Battery LED.
Describes the design and functionality of the Sunny Remote Control.
Details the function and data stored on the SD card.
Explains the options available for timer-based operation of the inverter.
Outlines the different display modes available on the Sunny Remote Control.
Details the functionality and displays within the standard operating mode.
Explains the various operating states shown in standard mode.
Describes the information displayed during normal inverter operation.
Explains the energy flow diagram shown on the display.
Details the indicators for the stand-alone grid status.
Explains the status indicators for the off-grid inverter.
Describes how the battery's state of charge is displayed.
Explains the indicators for the external energy source status.
Introduces the user mode for operating the off-grid system.
Explains the structure and content of display pages in user mode.
Details the layout and categories of display pages.
Describes the layout and categories of setting pages in user mode.
Provides step-by-step instructions for navigating display pages.
Guides users through the process of operating and configuring the inverter.
Introduces advanced modes for system configuration and diagnostics.
Provides instructions and requirements for entering installer mode.
Details the procedure for accessing expert mode from installer mode.
Explains the menu structure within installer and expert modes.
Describes the layout of the parameter page in advanced modes.
Guides users on how to navigate and select menus and parameters.
Provides detailed steps for setting and confirming parameters.
Explains how to access parameters directly using a five-digit number.
Outlines the requirements and steps to power on the off-grid inverter.
Describes the procedure for starting the entire off-grid system.
Provides instructions on how to safely stop the off-grid system.
Details the steps to completely power off the off-grid inverters.
Explains how to perform an emergency shutdown of the system.
Guides users on configuring scheduled start and stop times for the inverter.
Provides instructions on how to insert the SD card into the device.
Explains how to save and load device parameter sets.
Details the procedure for saving event and error logs to the SD card.
Provides steps for updating the device's firmware.
Explains how to check the current status of the SD card.
Outlines the safe procedure for removing the SD card.
Describes the types of files saved to the SD card.
Explains the file structure and format of saved data.
Provides instructions for manually starting the generator via the remote control.
Provides instructions for manually stopping the generator via the remote control.
Details manual generator start procedures when autostart is disabled.
Details manual generator stop procedures when autostart is disabled.
Instructions for cleaning the exterior of the off-grid inverter.
Guidance on cleaning the Sunny Remote Control unit.
Procedure for conducting a manual battery equalisation charge.
Describes how to check the system's functionality and registered errors.
Safety instructions for checking electrical connections.
Details on how to check and maintain the battery system.
Instructions for cleaning the internal fans of the inverter.
Step-by-step guide for replacing the battery.
Specific steps for performing installation work on the battery.
General guidance on handling errors, warnings, and events.
Explains how errors, warnings, and events are displayed on the remote.
Defines the different error levels and their impact on the inverter.
Describes how pending errors are handled during device activation.
Explains the automatic restart function and its limitations.
Details how master and slave units handle errors in a cluster.
Procedure for acknowledging and clearing generator-related errors.
Steps to acknowledge and clear severe error levels (3 and 4).
Guides on reconfiguring slave addresses within a cluster.
Procedure for changing slave addresses using the remote control.
Procedure for changing slave addresses without the remote control.
A collection of common questions and answers regarding the system.
FAQs specifically addressing issues with the off-grid inverter.
FAQs related to the operation and display of the Sunny Remote Control.
FAQs concerning the connection and operation of external energy sources.
FAQs related to battery performance, maintenance, and issues.
FAQs addressing issues with cluster and multicluster configurations.
Procedure for charging the battery after an automatic system shutdown.
Detailed steps for charging the battery, likely related to emergency mode.
Instructions on how to stop or interrupt the emergency charging process.
Procedure for safely disconnecting the generator from the AC1 terminal.
Definition of the absorption phase in battery charging.
Definition of the connection between loads, generators, and storage in a stand-alone grid.
Definition of Absorbent Glass Mat separator batteries.
Definition of the process protecting against unintentional grid formation.
Definition of an electrochemical energy storage device.
Definition of the operating mode for controlled battery recharging.
Definition of multiple off-grid inverters connected in parallel.
Definition of a charging phase with constant voltage.
Definition of a charge process to equalize battery cell states.
Definition of embedded software in electronic devices.
Definition of an electrical machine converting kinetic energy to electrical energy.
Definition of a bidirectional converter for stand-alone grids.
Definition of the entire system required for a stand-alone grid.
Definition of an electricity grid independent of public supply.
Describes the available charge in a battery as a percentage.
Provides the company's contact address and website.
Lists contact details for technical support and service.
To Next Page
