SMA WINDY BOY 3300 - Setting the Display Language

SMA Solar Technology AG Electrical Connection
Installation Guide WB33_38-IEN101830 27
5.4 Setting the Display Language
You can set the language of the display using the switches on the underside of the display assembly
inside the inverter.
Procedure
1. Open the inverter as described in section 7.2”Opening the Inverter” (page44).
2. Set the switches for the required language, as
shown below.
For type WB 3300-IT / 3800-IT inverters, the following switch settings apply:
3. Close the inverter as described in section 7.3”Closing the Inverter” (page45).
☑ The display language has now been set.
Language Switch S2 Switch S1
German B B
English B A
French A B
Spanish A A
Language Switch S2 Switch S1
Italian B A
English A A