SMA WINDY BOY 3300 - 10 Decommissioning; Dismantling the Inverter

SMA Solar Technology AG Decommissioning
Installation Guide WB33_38-IEN101830 61
10 Decommissioning
10.1 Dismantling the Inverter
1. Open the enclosure lid as described in section 7.2”Opening the Inverter” (page44).
2. Remove all cables from the inverter.
3. Close the inverter with the 4 screws and the
corresponding lock washers.
4. Remove the air grills on both sides.
5. Remove the screw between the product and the
wall mounting bracket.
6. Remove the inverter upwards from the wall
mounting bracket.
☑ The inverter is dismantled.