SMA WINDY BOY 3300 - Page 30

Electrical Connection SMA Solar Technology AG
30 WB33_38-IEN101830 Installation Guide
4. Push the threaded joint to the thread and screw into place.
☑ The PV connectors are now assembled and can be connected to the inverters, as described in
section 5.5.4”Connecting the Small Wind Turbine System (DC)” (page32).
☑ If the conductors are not visible in the
hollow cavity, the cable is not in the correct
position.
• Loosen the clamping clip using a
screwdriver.
• Remove cable and start again from step1.
Result Action