SMART Board MX Series User Manual

Chapter 2 Using basic features
smarttech.com/kb/171554 17
SMARTBoard MX (V3, V2 and V2-C) series
The image and table below list the remote control’s functions.
No. Name Procedure
1
Power
l
Press to enter or exit Standby mode (see Waking up the display
and putting it back to sleep on page14).
Note
Touch is not available right after waking up the display or
turning it on. Wait a few seconds and then the display will
respond to touch.
l
Press and hold for four seconds to turn off the display.
2 Home Open the iQ Home screen (see Using the Home button on
page15).
3 Up and down
buttons
Select a menu option in the settings.
4 OK Select menu option in the settings.
5 Left and right
buttons
Change the value of the selected setting.

SMART Board MX Series Specifications

General

Screen Sizes	65", 75", 86"
Response Time	8 ms
Processor	Quad-Core
Display Type	LCD
Touch Technology	Infrared
Operating System	Android
Connectivity	HDMI, VGA, USB, Ethernet, Wi-Fi, Bluetooth
Audio	Built-in stereo speakers
Brightness	350 cd/m²
Viewing Angle	178°
Touch Points	20
Warranty	3 years