PROGRAMMING
Touch Program again and the Day start time will appear. The hour will flash along with AM or PM.
Follow the same steps as in the Morning sequence. The factory defaults for the Day event are
8:00 AM, Cool Set 25°, Heat Set 16° C.
After setting the Day Heat Set temperature, touch Program again and the Evening start time will
appear. Follow the same steps. The factory defaults for the Evening event are
6:00 PM, Cool Set 24°, Heat Set 21° C.
After setting the Evening Heat Set temperature, touch Program again and the Night start time will
appear. Follow the same steps. The factory defaults for the Night event are
10:00 PM, Cool Set 28°, Heat Set 10° C.
Touch Program again and the word cpy (copy) will appear. If you want to copy the Monday schedule
to consecutive days of the week, touch the UP arrow to add additional days. Each day that you select
will flash. For example, you might want to copy the Monday schedule to Tuesday and Wednesday.
Once Tue and Wed are flashing, touch Program and cpy will flash confirming that the Monday
schedule is being copied to Tuesday and Wednesday. The thermostat will then advance to Thu
(Thursday).
If you elect to have a different schedule for each day of the week, simply touch Program when cpy
appears. The thermostat will automatically advance to the next day.
16
To Next Page
Loading...
