OVERRIDES
The new heating temperature will remain active until the next scheduled event takes place at which
time it will be deleted and only the programmed temperatures will be used. To manually cancel
Temporary Override, touch Program until Hold appears and then touch Hold. The thermostat will
resume normal programmed operation and the override period will stop flashing.
PERMANENT HOLD
There may be times when a permanent override is required such as during a vacation or holiday
period. To place the thermostat in Permanent Hold, simply touch Program and the word Hold will
appear. Next, touch the displayed temperature. While Set Heat or Set Cool are flashing, touch the
UP or DOWN arrow to adjust the permanent hold temperature(s) that you want to maintain.
Whenever you want the thermostat to resume normal programmed operation, simply touch Hold.
Program will again appear and the thermostat will resume programmed operation.
20
To Next Page
Loading...
