Chapter 2
Installing and securing your
SMART Board interactive
whiteboard
In this chapter
Refer to these topics for information about mounting your SMART Board X800 series
interactive whiteboard on a floor stand or on a wall.
Environmental requirements.................................................................. page 7
Installing your SMART Board interactive whiteboard ............................ page 8
Securing the pen tray and interactive whiteboard................................ page 10
Environmental requirements
Before installing your interactive whiteboard, review the following environmental
requirements.
Environmental
requirement
Parameter
Operating temperature 41°F to 95°F (5°C to 35°C)
Storage temperature -40°F to 120°F (-40°C to 50°C)
Humidity 5% to 80% relative humidity, non-condensing
Water and fluid
resistance
• Intended for indoor use only. Doesn’t meet any
salt-spray or water ingress requirements.
• Don’t pour or spray liquids directly onto the interactive
whiteboard or any of its sub-components. These liquids
might get into areas where they could damage sensitive
electronic components. Refer to page 28 for detailed
instructions on cleaning your interactive whiteboard.
To Next Page
Loading...
Need help?
General
