SMART forfour - Folding down bench seat

X
Press the 9 or : button to set the
brightness level. Level 1 corresponds to
dimmed instrument lighting and level 5
to bright instrument lighting.
With the selection during night-time
driving, the instrument cluster bright-
ness level is set at the same time.
X
Press the a
button
to confirm the set-
ting.
The instrument lighting is set and the
display shows the Display submenu.
Digital speedometer submenu
In the Digital speedometer submenu you
have the following options:
R
showing/hiding
the
digital speedometer
R
setting the unit for speed in the digital
speedometer
X
To call up the submenu: press the 9
or : button on the steering wheel to
select
the Settings
menu and press a
on the steering wheel to confirm.
X
Press the 9 or : button to select
the Display submenu and confirm with
a.
X
Press the 9 or : button to select
the Digital speedometer submenu and
confirm with a.
X
To show/hide the digital speedometer:
press the 9 or : button to select
the On function.
X
Activate or deactivate the On
function
by
pressing the a button.
When the function is highlighted, it is
activated and the display shows the dig-
ital speedometer (Y page 159).
X
To set the unit of speed: press the 9
or : button to select Unit and press
the a button to confirm.
X
Press the 9 or : button to select
the
unit
of speed km/h or mph and confirm
with a.
The display shows the Digital speed‐
ometer submenu.
X
To leave the submenu: press the 9
or : button to select the back func-
tion and confirm with a.
The display shows the Display submenu.
i
If
you
press and hold 9 or :, you
change directly to the back function.
Setting the unit of measurement for dis-
tance
If you change the unit of measurement for
distance, the values in the:
R
trip computer "From start" or "From
reset" (Y page 160)
R
eco score from start (Y page 161)
R
fuel consumption (Y page 162)
menus are also reset automatically.
You can only set the unit of measurement for
distance when the vehicle is stationary.
X
Press the 9 or : button on the
steering wheel to select the Settings
menu and press a on the steering
wheel to confirm.
X
Press the 9 or : button to select
the Display submenu and confirm with
a.
X
Press the 9 or : button to select
Units of distance and press the a
button to confirm.
X
Press the 9 or : button to select
Kilometres
or Miles as the unit of meas-
urement for distance and press a to
confirm.
The display shows the Display submenu.
The selected unit of measurement for dis-
tance applies as the basis for:
R
the trip computer
R
the service display
R
the fuel consumption display
R
the total distance recorder and the trip
meter display
R
the speed display for cruise control and
the limiter
Menus and submenus
165
>> On-board computer and displays.
Z