SMART forfour - Setting

X
To leave the submenu: press the 9
or : button on the steering wheel to
select the back function and press a
on the steering wheel to confirm.
The display shows the Settings menu.
i
If you
press and hold 9 or :, you
change directly to the back function.
Setting the time
X
Press the 9 or : button on the
steering wheel to select the Settings
menu and press a on the steering
wheel to confirm.
X
Press the 9 or : button to select
the Time
submenu
and confirm with a.
X
Press the 9 or : button to select
Set the
time and press the a button
to confirm.
X
Press the 9 or : button to set the
hour and confirm with a.
X
Press the 9 or : button to set the
minutes and confirm with a.
The
time
is set and the display shows the
Time submenu.
i
If
you
are setting the time and keep the
9 or : button depressed, then the
numerical value changes continuously.
Setting the time format (12/24 h)
X
Press the 9 or : button on the
steering wheel to select the Settings
menu and press a on the steering
wheel to confirm.
X
Press the 9 or : button to select
the Time submenu
and confirm with a.
X
Press 9 or : to select Time for‐
mat (12/24 h) and confirm with a.
X
Press 9 or :
to select the desired
time format 24 hour or 12 hour (am/pm)
and confirm with a.
The time format is accepted and the dis-
play shows the Time submenu.
Display submenu
Introduction
In the Display
submenu, you can call up the
following submenus:
R
Display/switch brightness submenu
(Y page 164)
-
Adjusting the instrument cluster
lighting
R
Digital speedometer submenu, see
(Y page 165)
-
Shows and sets the digital speedometer
R
Units of distance submenu
(Y page 165)
-
Setting the units of distance
R
Units of temperature submenu
(Y page 166)
-
Setting the units of temperature
X
To leave the submenu: press the 9
or : button on the steering wheel to
select the back function and press a
on the steering wheel to confirm.
The display shows the Settings menu.
i
If
you
press and hold 9 or :, you
change directly to the back function.
Adjusting the instrument cluster lighting
Instrument cluster lighting includes illu-
mination of the instrument cluster, the
additional instruments on the dashboard,
the displays and the controls.
You can set the brightness of the instru-
ment cluster to different levels with the
Display/switch brightness function.
X
Press the 9 or : button on the
steering wheel to select the Settings
menu and press a on the steering
wheel to confirm.
X
Press the 9 or : button to select
the Display submenu and confirm with
a.
X
Press the 9 or : button to select
Display/switch brightness and press
the a button to confirm.
164
Menus and submenus
>> On-board computer and displays.