The head restraints can be adjusted to the
in-use position. When the rear seats are
occupied, use
this position. The rest posi-
tion of the head restraints is used, e.g.
when you wish to fold the rear seat backr-
ests forwards.
X
To raise (in-use position): pull
the head
restraint up until the head restraint
engages.
X
To lower (rest position): press release
catch : and push the head restraint
down.
Switching the seat heating on/off
Switching on/off
G
WARNING
If you repeatedly switch on seat heating,
the seat cushion and backrest padding may
become very hot. The health of vehicle
occupants
with
limited temperature sensi-
tivity or a limited ability to react to
excessively high temperatures may be
affected or they may even suffer burn-like
injuries. There is a risk of injury.
Therefore, do not switch on the seat heating
repeatedly.
X
Turn the key to position 2 in
the ignition
lock (Y page 121).
X
To switch on: press button ;.
Indicator lamp : in the button lights
up.
X
To switch off: press button ;.
Indicator
lamp : in the button goes out.
i
If the battery voltage is too low, the
seat heating may switch off.
The seat heating switches off automati-
cally after about 10 minutes.
88
Seats
>> Seats, steering wheel and mirrors.
To Next Page
Loading...
