SMART forfour - Readyspace Seats

Folding the rear seat backrest back
!
Make sure that the seat belt does not
become trapped when folding the rear
seat backrest back. Otherwise, it could
be damaged.
X
Vehicles with one-piece rear bench seat:
fold complete seat backrest : back
until it engages.
Ensure that red lock status indicator ;
on the loop is no longer visible.
X
Vehicles with split rear bench seat: fold
back
left
or right seat backrest : until
it engages.
Ensure that red lock status indicator ;
on the loop is no longer visible.
X
Adjust the head restraints if necessary
(Y page 87).
Adjusting the angle of the rear seat
backrests (cargo position)
Vehicles with split rear bench seat: you can
move the rear seat backrests to a more
upright position (cargo position) to
increase the luggage compartment capa-
city further.
X
Release right-hand or left-hand seat
backrest ; (Y page 206).
X
Fold right-hand or left-hand seat back-
rest ; slightly forwards.
Illustration: seat backrest catch folded for-
wards
X
Fold seat backrest catch : forwards.
X
Fold right-hand or left-hand seat back-
rest : back to seat backrest catch :
until it locks.
The cargo position has been set up.
Readyspace seats
General notes
You can rotate the rear seat cushions 180°
and remove the cargo box. This will give
you a
flat loading surface and a larger load
capacity in the rear.
Rotating the seat cushions
G
WARNING
If you rotate the rear seat cushion when the
cargo box is removed, you or other vehicle
occupants
could be caught in the seat mech-
anism. There is a risk of injury.
Only rotate the seat cushion if the cargo
box is fitted. Ensure that no parts of the
Stowage areas
207
>> Stowing and features.
Z