Display messages Possible causes/consequences and M Solutions
è
When exiting:
remove key
The vehicle is in automatic engine stop. You have opened the
driver's door or released the seat belt and the key is in the
ignition lock.
X
The engine will not start automatically.
X
Please take note of the conditions for the automatic engine
stop/engine start (Y page 124)
.
è
Depress clutch to
start engine
Vehicles with manual transmission only: you have stalled the
engine when pulling away or when stopping.
X
Depress the clutch pedal fully.
The engine starts automatically.
è
Engage neutral to
start engine
Vehicles with manual transmission only: you have stalled the
engine when
pulling away or when stopping and the clutch sen-
sor is inoperative.
X
Engage neutral (Y page 127).
The engine starts automatically.
To start engine:
shift to neutral
or depress clutch
Vehicles with manual transmission only: you
are trying to start
the engine, a gear is engaged and the clutch pedal is not fully
depressed.
To start the engine:
X
Engage neutral. (Y page 127)
or
X
Depress the clutch pedal fully.
To start engine:
shift to neutral
Vehicles with manual transmission only: the clutch sensor is
malfunctioning. You are trying to start the engine, a gear is
engaged and the clutch pedal is fully depressed.
X
To start the engine, engage neutral. (Y page 127)
X
Visit a qualified specialist workshop.
A
Parking brake mal‐
function Apply
parking brake to
park
Only for vehicles with automatic transmission: the letter N
flashes in the middle of the display if you try to shift to P. A
warning tone also sounds.
The parking lock is malfunctioning.
X
Apply the parking brake to park.
Display messages (on-board computer with colour display)
187
>> On-board computer and displays.
Z
To Next Page
