UNAUTHORIZED MODIFICATION MAY CAUSE POOR
PERFORMANCE OF THE E-VALVE. DO NOT MAKE
MODIFICATIONS TO THE VALVE AS THIS COULD
ADVERSELY AFFECT THE PERFORMANCE OF THE
VALVE AND VOID THE WARRANTY. SMARTAP WILL
NOT BE LIABLE UNDER ITS WARRANTY OR
OTHERWISE FOR PERSONAL INJURY OR DAMAGE
CAUSED BY AN UNAUTHORIZED MODIFICATION.
PRODUCT MUST BE INSTALLED BY QUALIFIED AND
CERTIFIED PERSONNEL, IN ACCORDANCE WITH ALL
CURRENT RELEVANT STATUTES AND REGULATIONS
IN YOUR COUNTRY.
ALL SHOWERS REQUIRING AN ELECTRICAL
CONNECTION MUST BE INSTALLED BY QUALIFIED
PERSONEL FOLLOWING THE RELEVANT
REGULATIONS IN YOUR COUNTRY AND CERTIFIED TO
CURRENT BUILDING REGULATIONS.
BEFORE ANY ELECTRICAL CONNECTIONS ARE MADE,
THE ELECTRICITY SUPPLY MUST BE TURNED OFF AT
THE MAINS SWITCH. ALL ELECTRICAL INSTALLATION
MUST BE CARRIED OUT ONLY BY QUALIFIED
PERSONNEL.
BE CAREFUL WHILE UNPACKING; THE SYSTEM IS
FRAGILE.
To Next Page
Loading...