HGM4020DC GENSET CONTROLLER USER MANUAL
HGM4020DC Genset Controller Version 1.0 2019-04-10 Page 5 of 31
— Fits with switches to control rectifiers, and functions of setting output voltage and current;
— Multiple crank disconnect conditions (speed sensor, generating and oil pressure) can be selected;
— Access monitoring function, which can provide security for the machine room;
— With emergency start function;
— With scheduled not run function(monthly, weekly, daily, duration time can be set);
— With inhibit to run setting, which shall inhibit genset to run in auto mode;
— With cyclic start/stop function, controlling genset start/stop for how much time circularly;
— With run log and real-time clock. Maximum 50 running records can be memorized (loop save);
— With maintenance log. Maximum 20 records can be memorized (loop save);
— With event log. Maximum 99 records can be memorized (loop save);
— Parameter setting function: users can configure parameters and users-defined parameters will be
stored in the internal FLASH to avoid parameters lost in case of power dropout. All parameters can
be configured from front panel or through programmable interface (USB or RS485 interface) via PC;
— Waterproof security level IP65 due to rubber seal installed between the controller enclosure and
panel fascia;
— With metal fixing clips;
— Modular design, anti-flaming ABS plastic enclosure, pluggable connection terminals and embedded
installation way; compact structure with easy mounting.
To Next Page
Loading...
