Accurately measure and display the electric parameters as well as water temperature,
oil pressure, fuel level and others;
Control and protection: Genset automatic start/stop/parallel operation,
synchronization detection, load sharing and alarm protection;
Maintenance function, maintenance due warning/shutdown alarm;
For the engines without J1939: temperature, pressure and fuel level sensors can be
connected externally; multiple ready to use and user-defined sensor curves;
Free adjustment of input port information that is displayed on LCD when the input
port is active: Chinese/English support, 20 English letters or 10 Chinese characters
maximum;
Close to activate/open to activate configurable input port types; normally
open/normally closed configurable output port types;
Custom logic output;
Real-time calendar, real-time clock and total run counter;
99 event logs can be saved circularly and can be inquired on the spot.
Multi-level password protection to avoid misuse by non-qualified personnel;
Genset parameters can be adjusted from front panel or via PC;
Wide power supply range DC(8-35)V enables compatibility with different start battery
voltage environment;
RS485/232C communication interface utilizing MODBUS protocol enables remote
control, remote measurement, remote communication and remote adjustment of the
genset;
Modular design, anti-flaming ABS plastic enclosure, pluggable connection terminals
and embedded installation way; compact structure with easy mounting.
To Next Page
Loading...
Need help?
General
