Smartgen HGM6510 User Manual

HGM6510 Genset Parallel Unit
ISSUE 2013-07-15
Version 1.7
Page 16 of 52
HGM6510 GENSET PARALLEL UNIT
does not lead to shutdown, and when warning condition is no longer present, warning
alarm will be cleared automatically. Warning types are as follows:
6 PROTECTIONS
When an alarm is present, the Common Alarm LED (if configured) will illuminate and
alarm information will be displayed on LCD.
6.1 WARNING ALARMS
Warnings are not shutdown alarms and do not affect the operation of the genset. Warning
No
Type
Active Range
Description
1
Gen Over
Current
Always active
When the controller detects that the genset
current has exceeded the pre-set value, it
will initiate a warning alarm and the
corresponding alarm information will be
displayed on LCD.
2
Fail To Stop
After “Fail to
Stop” Delay
After “fail to stop” delay, if gen-set is still
output electricity or oil pressure is not 0, it
will initiate a warning alarm and the
corresponding alarm information will be
displayed on LCD.
3
Low Fuel
Level
Always active
When the controller detects that the fuel
level has fallen below the pre-set value, it will
initiate a warning alarm and the
corresponding alarm information will be
displayed on LCD.
4
Charge
Alternator
Failure
From “Start Idle”
delay to “Stop
Idle” delay
When the controller detects that charger
voltage has fallen below the pre-set value, it
will initiate a warning alarm and the
corresponding alarm information will be
displayed on LCD.
5
Loss of Speed
Signal
From “Crank
Success” to
“Stop Idle” delay
When the controller detects that the engine
speed is 0, it will initiate a warning alarm and
the corresponding alarm information will be
displayed on LCD.
6
Battery Under
Volt
Always active
When the controller detects that start battery
voltage has fallen below the pre-set value, it
will initiate a warning alarm and the
corresponding alarm information will be
displayed on LCD.
7
Battery Over
Volt
Always active
When the controller detects that start battery
voltage has exceeded the pre-set value, it
will initiate a warning alarm and the
corresponding alarm information will be
displayed on LCD.

Smartgen HGM6510 Specifications

General

Brand	Smartgen
Model	HGM6510
Category	Controller
Language	English