Smartrise HPV900 User Manual

C4 User Manual
October 25, 2021 ©2021 Smartrise Engineering, Inc. All Rights Reserved Page i
Document History
Date
Version
Summary of Changes
October 25, 2021
4.1
Added 24 Input Board
Removed Manual Traction Test
September 30, 2021
4.0
Added Advanced Configuration
Added Hoistway Access Slide Distance
Added Hall Call Security
Moved all Car Data information to one section
Added I/O definitions
Added Input Status
Updated Access Code
Added description for Floor Adjustment menu
Added Invert Outputs
Added Recall Key
Deleted Sabbath Dwell Timer menu
Moved Sabbath Operation to SETUP menu
Added VIP
Added Active Shooter
Added Marshal Mode
Replaced brackets used on Sensor Array Assembly.
Added Swing Opening
Added an Enter Door Command display when there is only
front doors configured
Added Door Type
Added Brakes
November 13, 2020
3.1
Added Emcan LWD reference and Hall board 12 DIP Hall
Mask Mapping switch settings
October 30, 2020
3.0
Deleted Load Weighing section and created a reference to
the C4 Load Weighing manual
Deleted DAD connection procedure and created a
reference to the C4 GUI manual
Replaced Emergency section
Updated all menu structures
Replaced CT and COP figures due to jumper
Replaced S-Curve drawing with a more detailed drawing
Added a 12-DIP configuration Hall board
Added and deleted menu functions
Added reference to specific drive when wiring C4 for
Construction Mode
Added Debug, About, Status, XREG, Attendant, Parking
sections
Expanded Doors, Faults, Alarms, Floors, S-Curve, and Speed
sections to include additional menu descriptions and
procedures

Smartrise HPV900 Specifications

General

Brand	Smartrise
Model	HPV900
Category	Controller
Language	English