SMC Networks 10/100 Mbps User Manual

H ARDWARE I NSTALLATION
7
Hardware Installation
Network cards are sensitive to static electricity. To protect the card, avoid
touching its electrical components and always touch the metal chassis of
your computer before handling the card.
1. Switch off the computer, unplug the power cord, and remove the
computer’s cover.
2. Select an unused PCI bus master slot and remove its protective
bracket.
3. Carefully insert the card and press until all the edge connectors are
firmly seated inside the slot. Then screw the card’s bracket securely
into the PC’s chassis.

SMC Networks 10/100 Mbps Specifications

General

Brand	SMC Networks
Model	10/100 Mbps
Category	PCI Card
Language	English