SMC Networks 10/100 Mbps - Filter Setting - Pattern; Filter Setting - Buffer Size

I NSTALLATION
32
Filter Setting - Pattern
Sets the pattern and position as filtering criteria.
Note: Note: in the above example, “11 22 33 44 55 66 99 DD” is at
byte position 0x23. Therefore, WiNeTool will only capture a
packet with the same pattern (11 22 33 44 55 66 99 DD) in the
same position.
Filter Setting - Buffer Size
Set the hard disk buffer size for captured packets. The default is
300 Kilobytes