System Configuration
5-86
5
AP System Configuration – The AP System Configuration table displays the basic
system configuration settings:
• System Up Time: Length of time the management agent has been up.
• MAC Address: The physical layer address for this device.
• System Name: Name assigned to this system.
• System Contact: Administrator responsible for the system.
• IP Address: IP address of the management interface for this device.
• IP Default Gateway: IP address of the gateway router between this device and
management stations that exist on other network segments.
• HTTP Server: Shows if management access via HTTP is enabled.
• HTTP Server Port: Shows the TCP port used by the HTTP interface.
• Version: Shows the version number for the runtime code.
AP Wireless Configuration – The AP Wireless Configuration tables display the radio
and VAP interface settings listed below. Note that Interface Wireless G refers the
802.11b/g radio.
• SSID: The service set identifier for the VAP interface.
• Radio Channel: The radio channel through which the access point communicates
with wireless clients.
• Encryption: The key size used for data encryption.
• Authentication Type: Shows the type of authentication used.
• 802.1X: Shows if IEEE 802.1X access control for wireless clients is enabled.
To Next Page
Loading...
