SMC Networks LEFS25 User Manual

- 15 -
(2) Servo motor (24VDC) Belt drive
Note 1) The strokes shown in ( ) are produced upon receipt of order.
Note 2) The speed is dependent on the workload. Check the following “Speed-workload graphs” for the selected model.
Note 3) A reference value for correcting an error in reciprocal operation.
Note 4) Impact resistance: No malfunction occurred when the actuator was tested with a drop tester in both an axial direction and
perpendicular direction to the lead screw. (The test was performed with the actuator in the initial state.)
Vibration resistance: No malfunction occurred in a test ranging between 45 to 2000 Hz, when the actuator was tested in both an axial
direction and a perpendicular direction to the lead screw. (The test was performed with the actuator in the initial state.)
Note 5) The "Power consumption" (including the controller) is for when the actuator is operating.
Note 6) The “Standby power consumption when operating” (including the controller) is for when the actuator is stopped in the set position
during operation.
Note 7) The "Momentary max. power consumption" (including the controller) is for when the actuator is operating.
This value can be used for the selection of the power supply.
Note 8) Only applies to actuators supplied with a lock.
Note 9) For the actuator with lock, please add the power consumption for the lock.
Weight
Model
LEFB16A
LEFB25A
Stroke(mm)
(300)
500
(600)
(700)
800
(900)
1000
(300)
500
(600)
(700)
800
(900)
1000
(1200)
(1500)
(1800)
(2000)
Weight(kg)
1.19
1.45
1.58
1.71
1.84
1.97
2.10
2.39
2.85
3.08
3.31
3.54
3.77
4.00
4.46
5.15
5.84
6.30
Additional weight for
lock(kg)
0.12
0.19
<Speed-Workload graph> Horizontal Transfer
Horizontal
78
Lock unit
specifications
Type note8)
Holding force [N]
4
19
Power consumption [W] note9)
2.9
5
Non-magnetizing lock
Rated voltage [V]
Standby power consumption when operating [W]
note6)
Horizon 4
Horizon5
DC24±10%
Max.instantaneous power consumption [W]
note7)
87
120
Power consumption [W] note5)
24VDC±10%
Model
LEFB16
LEFB25
69
Incremental A/B (800 pulse/rotation)/Z phase
Servo motor(24VDC)
Actuator specification
Stroke [mm] Note1)
300, 500, 600, 700, 800,
900, 1000
300, 500, 600, 700, 800,
900, 1000, 1200, 1500,
1800, 2000
1
2
5 to 40
3,000
□42
Lost motion[mm] note3)
Note2)Speed [mm/s]
5 to 2000
5 to 2000
Max.acceleration/deceleration [mm/s2]
0.1 or less
Impact/Vibration resistanc [m/s2] note4)
Actuation type
Belt
50 / 20
Positioning repeeatability [mm]
48
48
±0.08
Motor type
Encoder
90 or less(No condensation)
Operating humidity range [%RH]
Motor size
□28
Guide type
Linear Guide
Operating temperature range [℃]
Equivalent lead [mm]
Rated voltage [V]
Electric specifications
Work load [kg] note2)
Motor output [W]
36
30
0
2
4
6
8
10
0 500 1000 1500 2000
Speed: V [mm/s]
Work load: W [kg]
LE FB 1 6
LE FB 2 5
2021-05-2010:32
DW913599

SMC Networks LEFS25 Specifications

General

Brand	SMC Networks
Model	LEFS25
Category	Controller
Language	English