- 22 -
3.2 Setting Function
Refer to the operation manual of the controller (LEC series) for the detail of the setting function.
Easy Mode for simple setting
>Select “Easy mode” for instant operation
Controller setting software
Setting and operation, such as the step data setting, test drive and JOG / fixed-distance moving, can
be performed on the same page.
Teaching box
Setting and operation by the simple screen without scrolling.
Select function by the iconized menu at the first page.
Step data setting and monitoring at the second page.
It can be registered by “SET”
after entering the values.
Operation status can be
checked
Example of setting the step data
Example of checking the operation status
Speed setting of JOG /
fixed distance
2021-05-2010:32
DW913599
To Next Page
Loading...
Need help?
General
