ADVANCED SETUP
47
Channel and SSID
You must specify a common radio channel and SSID (Service
Set ID) to be used by the Router and all of your wireless clients.
Be sure you configure all of your clients to the same values.
SSID: The Service Set ID. This should be set to the same value
as the other wireless devices in your network.
SSID Broadcast: Broadcasting the SSID on the wireless network
for easy connection with client PCs. For security reasons, you
should disable SSID broadcast. (Default: Enable)
Note: The SSID is case sensitive and can consist of up to 32
alphanumeric characters.
Wireless Mode: Set the communication mode for
the Router. Default: Mixed (11b+11g)
To Next Page
Loading...
Need help?
General
