SMC Networks SMCD3GN2 User Manual

Configuring Your Gateway
68
SMCD3GN2 Wireless Cable Modem User Manual
Adding Predefined Services
Using the following procedure, you can select well-known services and specify the LAN host
IP address(es) that will provide the service to the Internet.
1. In the Port Forwarding menu, uncheck Disable Port Forwarding Function if it is checked.
2. Click the Add button below the Predefined Service Table. The Predefined Service menu
appears (see Figure 39).
3. Complete the fields in the Predefined Service menu (see Table 16).
4. Click Apply. (Or click Back to return to the Port Forwarding menu or Cancel to cancel any
selections you made.) If you clicked Apply, the predefined service is added to the
Predefined Service Table.
5. To configure additional predefined services (up to 100, including customer-defined
services), repeat steps 2 through 4.
6. To change the settings for a predefined service, click the radio button to the left of the
service you want to change and click the Edit button. When the Predefined Service menu
appears, edit the settings as necessary (see Table 16) and click Apply.
7. To delete a predefined service, click the radio button to the left of the service you want to
delete and click the Delete button. No precautionary message appears before you delete a
predefined service.

SMC Networks SMCD3GN2 Specifications

General

Brand	SMC Networks
Model	SMCD3GN2
Category	Gateway
Language	English