SMC Networks SMCD3GN2 User Manual

Configuring Your Gateway
92
SMCD3GN2 Wireless Cable Modem User Manual
Configuring Schedule Rules
Schedule rules work with the Gateway’s URL blocking feature (described on page 90) to tell
the Gateway when to perform URL blocking.
To access the Schedule Rule menu, click Firewall in the menu bar and then click the
Schedule Rule submenu in the menu bar. Figure 50 shows an example of the menu.
Note: The Schedule Rule submenu is not available in the menu bar if Enable Firewall
Module is disabled in the Security Settings (Firewall) menu (see page 73).
Figure 50. Schedule Rule Menu
By default, the Gateway is configured to apply schedule rules to URL blocking 24 hours
every day. To change these settings:
1. To change the days when schedule rules are applied to URL blocking, uncheck Every Day
under Week Day. Then check the days when you want to apply schedule rules to URL
blocking.
2. To change the hours when schedule rules are applied to URL blocking, uncheck All Day.
Then specify the start and end times when you want to apply schedule rules to URL
blocking. Select AM or PM, where AM refers to times from Midnight to Noon and PM refers
to times from Noon to Midnight.
3. Click Apply.

SMC Networks SMCD3GN2 Specifications

General

Brand	SMC Networks
Model	SMCD3GN2
Category	Gateway
Language	English