Configuring Your Gateway
78
SMCD3GN2 Wireless Cable Modem User Manual
Table 18. Predefined Access Rules Menu Options
Option Description
Service List of predefined services from which you can choose.
Remote IPs Allows access to any remote IP address, one remote IP address, or a range of remote IP
addresses.
• If you select one remote IP address, enter the IP address in the Start IP field.
• If you select a range of remote IP addresses, enter the starting IP address in the Start IP
field and the ending IP address in the End IP field.
Start IP To forward to:
• A single remote IP address, enter the remote IP address.
• A range of remote IP addresses, enter the starting IP address here and the ending IP
address range in the next field.
This field is unavailable if the Gateway is configured for any remote IP addresses.
End IP Enter the ending IP address in the remote IP address range. This field is unavailable if the
Gateway is configured for any remote IP addresses or for a single remote IP address.
Local IPs Lets you specify any local IP addresses, a single local IP address, or a range of local IP
addresses to which the access rule is applied.
• If you select one local IP address, enter the IP address in the Start IP field.
• If you select a range of local IP addresses, enter the starting IP address in the Start IP field
and the ending IP address in the End IP field.
Start IP To apply the predefined access rule to:
• A single local IP address, enter the local IP address.
• A range of local IP addresses, enter the starting IP address here and the ending IP address
range in the next field.
This field is unavailable if the Gateway is configured for any local IP addresses.
End IP Ending IP address in the local IP address range to which the access rule will be applied. This
field is unavailable if the Gateway is configured for any local IP address or a single local IP
address.
To Next Page
Loading...
