SMC Networks SMCD3GN2 User Manual

Configuring Your Gateway
86
SMCD3GN2 Wireless Cable Modem User Manual
Table 21. Customer Defined Filter Menu Options
Option Description
Name Name for identifying the custom service. The name is for reference purposes only.
Type The type of protocol you want to filter. Choices are TCP, UDP, and TCP/UDP. Default is TCP.
LAN IPs Lets you apply the filter to any LAN IP addresses, a single LAN IP address, or a range of LAN
IP addresses.
• If you select one LAN IP address, enter the IP address in the Start IP field.
• If you select a range of LAN IP addresses, enter the starting IP address in the Start IP field
and the ending IP address in the End IP field.
Start IP To specify:
• A single remote IP address, enter the remote IP address.
• A range of remote IP addresses, enter the starting IP address here and the ending IP
address range in the next field.
This field is unavailable if the Gateway is configured for any remote IP addresses.
End IP Ending IP address in the LAN IP address range to which the filter will be applied. This field is
unavailable if the Gateway is configured for any LAN IP address or a single LAN IP address.
From Port Starting port number on which the filter will be applied. If necessary, contact the application
vendor for this information.
To Port Ending port number on which the filter will be applied. If necessary, contact the application
vendor for this information.

SMC Networks SMCD3GN2 Specifications

General

Brand	SMC Networks
Model	SMCD3GN2
Category	Gateway
Language	English