SMC Networks SMCD3GNV User Manual

Configuring the Gateway
95
SMCD3GNV Wireless Cable Modem Gateway User Manual
Defining Log Filters
The Log Filters area on the Logs menu lets you select the type of logs you want to generate
and the timeframe that the log is to cover.
To define a log filter:
1. If the Logs menu is not displayed, click Troubleshooting in the menu bar, and then click
the Logs submenu.
2. Perform the following steps under Log Filters:
a. Using the Log Type drop-down list, select the log to which you want to apply a filter,
Choices are:
 System Logs
 Event Logs
 Firewall Logs
b. By default, the log is generated for today. To change this timeframe, select a different
timeframe from the Time Frame drop-down list.
c. Click SHOW LOGS to apply the filter.
Printing or Downloading Log
After defining a log filter, use the following steps under System Logs to print or download
the log:
1. To print the log with the filter applied, click PRINT.
2. To download the log with the filter applied, click DOWNLOAD.

SMC Networks SMCD3GNV Specifications

General

Brand	SMC Networks
Model	SMCD3GNV
Category	Gateway
Language	English