W
EB
C
ONFIGURATION
17
Manual Configuration
Web – Click System, LAN Settings. Enter the IP address, subnet mask and
gateway, then click APPLY.
Figure 7 LAN Settings
Configuring the Logon Password
The administrator has write access for all parameters governing the
onboard agent. You should therefore assign a new administrator password
as soon as possible, and store it in a safe place.
Field Attributes
• Password – Specifies the user password.
(Range: 1-16 characters plain text, case sensitive)
Note: If, at any point, you cannot remember the password, you can
restore the original settings by following the procedure described
in the "Troubleshooting" section.
To Next Page
Loading...
