SME AC-M1 - Pump Motor Parameters

PUMP MOTOR
PARAMETER NAME PARAMETER DESCRIPTION
Minimum lift speed Minimum lift speed
Maximum lift speed Maximum lift speed
Tilt speed Pump motor speed with speed function active
Lateral shift (AUX 1 function) speed
Pump motor speed with lateral shift function (1
st
auxiliary) active
AUX 2 function speed
Pump motor speed with 2
nd
auxiliary function
active
AUX 3 function speed
Pump motor speed with 3
rd
auxiliary function
active
Pump acceleration ramp Lift acceleration
Pump deceleration ramp
Pump motor deceleration after the end of a
command
Hydro speed Pump motor speed when steering
Hydro idle speed
Pump motor speed with direction command
lever not in neutral, accelerator pressed and no
pump command active
Lift maximum current
Pump motor maximum current with lift function
active
Auxiliary maximum current
Pump motor maximum current with lift lever
released
High lift switch 1 lift maximum speed
Max. lift speed when the forks are above the1
st
critical height
High lift sw.2 lift maximum speed
Max. lift speed when the forks are above the
2
nd
critical height
High lift sw.1 tilt maximum speed
Max. tilt speed when the forks are above the1
st
critical height
High lift sw.2 tilt maximum speed
Max. tilt speed when the forks are above the
2
nd
critical height
High lift sw.1 AUX1 function max. speed
Max. side shift speed when the forks are above
the1
st
critical height
PRELIMINARY VERSION 61