User instructions
3. Description of the controls
3.1 Upper panel
All the dishwasher controls are grouped on the upper panel. Switch-on,
programming, switch-off etc. procedures are only possible when the door
is open.
1
ON/OFF BUTTON
Pressing this button energises the appliance.
2
SELECTED PROGRAM INDICATOR LIGHTS
Illumination of this light denotes the program selected and the
occurrence of a fault (troubleshooting).
3
PROGRAM SELECTION BUTTON
By pressing this button in sequence it is possible to select the desired
program.
4
RINSE AID WARNING LIGHT
Illumination of this light signals that rinse aid dispenser is empty.
5
EXTRA PROGRAM BUTTON
This button gives access to the one of the five extra programs (see table).
6
EXTRA PROGRAM LIGHT
Illuminates to indicate that one of the five extra programs (see table) is
going to be executed.
10
7
HALF LOAD BUTTON
Press this button to activate the half load wash option.
8
HALF LOAD LIGHT
Illumination of the light indicates selection of the HALF-LOAD function.
9
PROGRAM DELAY BUTTON
Press this button to delay the start of the program by up to 9 hours.
10
INFORMATION DISPLAY
1
234 5
678910
To Next Page
Loading...
