Smeg CWH520D - 10 Supplementary Functions; Selecting the CrysGlassware Function (Available in P1-P2); Selecting the Erin Extra Rinse Function (Available in P1-P2-P3-P4); Selecting the Sanitisation Function (Only Available in P3)


‐CWH520

28
on the intake water temperature, since the dishwasher is fitted with the HTR system, which
requiressettemperatureandpressureforrinsing.
10 SUPPLEMENTARY FUNCTIONS
Indicatorlightsshowing: off;green;orange;flashing.

Toselectasupplementaryfunction,whentheprogramrequiredisshownonthedisplay(P1,P2,P3or
P4)pressthebutton.Onlyonesupplementaryfunctioncanbeselectedforeachprogram.
10.1 Selectingthecrys“glassware”function(availableinP1‐P2)
Reducestheprogram’srinsingtemperatureandduration
Afterselectingthe"Crys”function,performacyclewiththeapplianceemptytostabilisetheboiler
temperature



Pressand hold itdown to selecttheglassware function
thenpresstoconfirmtheprogramstart.
10.2 Selectingtheerin“extrarinse”function(availableinP1‐P2‐P3‐P4)
Extendsthedurationoftherinse



Pressand hold it down to select the extra rinse
functionthenpress toconfirmtheprogramstart.

DuringperformanceofcycleswithExtraRinse,thecycledurationincreasesbyabout30"becauseofthe
increased duration of the rinsing phase and the time consequently required to restore the level and
temperatureintheboiler.If theTermostopisOFFand thedishwasherisconnectedtocoldwater,this
functionwillbelesseffective
10.3 Selectingthe“sanitisation”function(onlyavailableinP3)
Increasestheprogram’swashingandrinsingtemperaturesandduration