Instructions for the User
58
9.2.2 With pins
Open the door completely.
Insert two pins into the holes indicated A
in the two hinges towards the back of
them until they engage.
Grasp the door on both sides with both
hands, lift it forming an angle of around
30° and remove it.
To reassemble the door, put the hinges in
the relevant slots in the oven, making sure
that the grooved sections C are resting
completely in the slots. Lower the door
and once it is in place remove the pins
from the holes in the hinges.
To Next Page
Loading...
Need help?
General
