CHECK THAT THE VOLTAGE AND THE FREQUENCY OF THE
MAINS MATCH THE RATINGS ON THE NAMEPLATE OF THE
APPLIANCE POSITIONED ON THE INNER EDGE OF THE DOOR.
IN THE EVENT OF DAMAGE TO THE SUPPLY CORD, HAVE IT
REPLACED BY THE MANUFACTURER OR AN AUTHORIZED
TECHNICAL SERVICE CENTRE. THIS APPLIANCE MUST BE
GROUNDED. IN CASE OF A MALFUNCTION OF FAULT, THE
GROUND REDUCES THE RISK OF ELECTROCUTION BY
PROVIDING THE ELECTRICAL CURRENT WITH AN ALTERNATIVE,
LESS RESISTANT PATH.
THIS APPLIANCE MUST BE GROUNDED. IN CASE OF A
MALFUNCTION OF FAULT, THE GROUND REDUCES THE RISK OF
ELECTROCUTION BY PROVIDING THE ELECTRICAL CURRENT
WITH AN ALTERNATIVE, LESS RESISTANT PATH. THIS APPLIANCE
IS FITTED WITH A SUPPLY CORD CONTAINING A GROUND WIRE
AND PLUG. FIT THE PLUG INTO A SUITABLE SOCKET, INSTALLED
AND GROUNDED IN COMPLIANCE WITH THE LAWS IN FORCE IN
THE COUNTRY OF INSTALLATION.
BEFORE MAKING ELECTRICAL CONNECTIONS, DISCONNECT
THE MAINS POWER SUPPLY FROM THE WORK AREA.
5.2.2 Electrical connections and warnings
Grounding instructions
THIS APPLIANCE IS FITTED WITH A CORD WITH GROUND WIRE AND
PLUG. FIT THE PLUG INTO A SUITABLE SOCKET, INSTALLED AND
GROUNDED IN COMPLIANCE WITH THE LAWS IN FORCE IN THE
COUNTRY OF INSTALLATION.
CHECK THAT THE MAINS SUPPLY IN THE PLACE OF
INSTALLATION COMPLIES WITH THE REGULATIONS IN FORCE IN
THE COUNTRY OF USE, AND THAT IT IS CORRECTLY
GROUNDED.
WARNING AN INCORRECTLY CONNECTED GROUND WIRE MAY
GENERATE THE RISK OF ELECTROCUTION. IF IN DOUBT AS TO
THE CORRECT GROUNDING OF THE APPLIANCE, CALL IN A
QUALIFIED ELECTRICIAN OR THE TECHNICAL ASSISTANCE
SERVICE.
INSTALLATION INSTRUCTION
EN
22
To Next Page
Loading...
Need help?
General
