Adjusting the upper rack
The upper rack can be set in three different positions on both sides. The
rack must be level on both sides.
To raise the rack (ref. A fig. 5-15), lift it with the two handles (e.g.: ref. B
fig. 5-15) to the first or second catch depending on the height required.
To lower it (ref. C fig. 5-15), pull up the two release levers (e.g.: ref. D fig.
5-15). This is also possible with the rack loaded, but in this case when
lowering the rack it should be held steady with one hand to avoid knock-
ing the dishes.
A
B
D
C
Fig. 5-15
USER INSTRUCTIONS
33
EN